Matic M1 M1 Plus & M1 Ultimate

The Matic M1 comes in 3 derivatives - M1, M1 Plus and M1 Ultimate. The different versions include various options for tooling and fabric clamping. All M1 tables provide full fabric handling so one person can operate the table with full efficiency. They are ideal for workrooms with high output requirements and for the cutting of screens, black-out, Zebra fabrics, clear PVC, canvas and polyester.

The novel clamping system eliminates the requirement for suction to hold down the fabric so no plastic overlays, no suction holes in the surface and no requirement for 3 phase power and no noise issue in the workroom. The M1 is also a very cost effective solution. In the simplest version the M1 cut tool is a pressurised round blade cutting automatically in X and Y directions. If ultrasonic cutting is only occasionally required, then it can be added on the long axis cut of the table as a trim cutter. The M1 Ultimate has full X and Y directional cutting with either crush cut or ultrasonic tools and cuts on a glass table top.

It is always advisable to discuss the M1 table options with Raytech. We have designed and have had customised additional table sections manufactured to enable the fast attachment of roller blinds to the tube together with a motorized wind up of the blind.

• Possibility of cutting from scraps
• Easy access on all 4 sides of the table
• Silent cutting process - Lower than 50 decibels during the cutting process thanks to the glass cutting surface and the use of press bars instead of vacuum system
• Glass cutting surface will prevent the wear of the ultrasonic and knife cutting tools.
• Pressure bars to hold the fabric in place on both cutting directions
• Low cost of operation and maintenance
• Low power consumption
• Reduce waste of fabric and know exactly the amount of wasted fabric with the use of the nesting function on the Athenea Workflow Management Software.
• Fast cutting and movement of the tools
• No need to measure before or after cutting
• Cutting orders can be pulled by the machine from your ERP system
• Possibility to add motorized storage under the table that will be linked with your inventory.